Answer:

After an RTSP multicast address is configured, the third-party player can request the RTSP multicast media stream from the camera through the RTP protocol.

Note: This function or management page may vary with models. Please see actual Web interface for details.

1. Click Setup > Video & Audio > Media Stream > RTSP Multicast Address.

2. Set the multicast address (224.0.0.0 to 239.255.255.255) and port number (0 to 65535).

3. Click Save.

TAGS:
RTSP, multicast address, multicast media stream, third-party player, RTP protocol, network setup